ServiceM8's integration with Xero sends each invoice to Xero when you approve it, brings payments recorded in Xero back into ServiceM8 within 30 minutes, and keeps clients and items matched in both systems. Tax rates only flow from Xero into ServiceM8, income accounts are imported from Xero, tracking categories refresh once a day, and supplier bills and purchase orders aren't on ServiceM8's list of what syncs.

Most sync problems trace back to a handful of causes: an invoice number already used in Xero, an archived contact, a zero-value invoice or the wrong Xero organisation. Each has a known fix, and they're all below.

The short version: decide your invoice number, invoice status and payment account settings before you approve the first job. Don't raise invoices directly in Xero for jobs that live in ServiceM8. If your office still re-types supplier bills or builds job reports by hand, that's the gap an automation on top can fill.

What does the ServiceM8 Xero integration sync?

ServiceM8 is job management software for trades and service businesses. It has been listed on the Xero App Store since July 2015, and on 19 November 2026 the listing showed a 4.6 out of 5 rating from 353 Xero users. The connection is built in. You switch it on as an add-on inside ServiceM8, so there's no third-party connector in the middle.

Here's what moves between the two, taken from ServiceM8's own help centre article How the sync with Xero works and its related FAQs, checked 19 November 2026.

RecordDirectionWhenWorth knowing
InvoicesServiceM8 to XeroWhen you approve the invoiceIf you change the total later, the lines re-sync, but only until a payment or credit note is allocated in Xero. Zero-value invoices aren't sent. Invoices created in Xero don't come back to ServiceM8.
Payments taken in ServiceM8ServiceM8 to XeroStraight away if the invoice is already approved, otherwise when it's exportedThey go to the Xero account you pick in ServiceM8's invoicing preferences, with a reference like VISA or EFTPOS.
Payments recorded in XeroXero to ServiceM8Within 30 minutesOnce the invoice is paid in full in Xero, ServiceM8 marks it paid.
ClientsBoth ways, once linkedAbout every 30 minutesXero customers and generic contacts come in when you connect. A new ServiceM8 client only reaches Xero with its first approved invoice. Supplier-only contacts aren't imported.
Items and materialsBoth ways, once linkedWithin 30 minutesXero items arrive as Materials. Items deleted or set inactive in Xero stay in ServiceM8.
Tax ratesXero to ServiceM8 onlyOn connection, then kept up to dateChanges made to tax in ServiceM8 don't go back to Xero.
Income accountsImported from XeroImported automaticallyOnly accounts set as Sales or Revenue type in Xero appear.
Tracking categoriesValues set on the job go to Xero with the invoiceCategories refresh from Xero once a dayNeeds the Xero Tracking Categories add-on. A new value in Xero can take up to 24 hours to show in ServiceM8.
TimesheetsServiceM8 to XeroAt the end of each pay periodNeeds the separate Automated Timesheet Sync add-on. It sends clock on and off times, which are different from job check in and out times.
Supplier bills and purchase ordersNot listedServiceM8's Xero sync article doesn't cover them. The one exception is ServiceM8 Pay fees, covered below.

Two rules from that article catch people out. A client in ServiceM8 that hasn't synced yet will be overwritten if someone enters the same client by hand in Xero. And contacts deleted in ServiceM8 are archived in Xero, while items deleted in ServiceM8 are deleted in Xero.

If you're still choosing between job systems, our ServiceM8, Tradify, Fergus and Simpro comparison covers what each one automates on its own. This page sticks to the Xero link.

How do you connect ServiceM8 to Xero?

ServiceM8's connection guide is short. Log in on a PC or Mac, go to Settings, then ServiceM8 Add-ons, and click Connect on Xero Integration. The setup wizard asks for your tax setting, sends you to Xero to log in, and asks you to pick the Xero organisation. Within a few minutes your Xero customers and inventory items start appearing in ServiceM8.

The connection takes minutes. The settings you choose before the first invoice matter more. These are the four I'd decide on with your bookkeeper first:

  1. Which Xero organisation. If you run more than one entity, an invoice can land in the wrong one. ServiceM8's fix is to re-integrate with the correct organisation and approve the job again.
  2. Who issues invoice numbers. In Settings, then Preferences, then Invoicing, the Xero invoice number field lets ServiceM8 use its job number or lets Xero issue the number. If Xero issues it, the ServiceM8 job number goes into Xero's Reference field. If the job number is the invoice number, the Reference field gets the ServiceM8 PO number instead (see ServiceM8's Reference field article).
  3. Draft or approved in Xero. You can send invoices to Xero as Awaiting Approval (a draft) or Approved. If your bookkeeper likes to check invoices before they're final, pick Awaiting Approval.
  4. Which account receives payments. Payments taken in the ServiceM8 app go to the Xero account set as your default account for payments. Get it right before the first card payment. ServiceM8 says a payment sent to Xero can only be removed in Xero.

Why isn't my ServiceM8 invoice showing in Xero?

This is the search most people land on, so here are the common causes and ServiceM8's own fixes in one place. Invoice number and archived contact errors show as an error icon in Invoicing, then Awaiting Approval.

What you seeLikely causeFix from ServiceM8's help centre
"Invoice number must be unique", or an invoice turns up in Xero as 4899AThat number already exists in Xero, for example from an invoice raised directly in Xero or one that was voidedFind the old invoice in Xero (search with Include Deleted & Voided), then change its number, or delete it if it's a draft. To stop it happening, let Xero issue invoice numbers, or rename voided invoices first (for example "102void").
"The contact ... has been archived"The client is archived in XeroIn Xero, go to Contacts, then All contacts, then the Archived tab, open the contact and click Restore. Then approve again in ServiceM8.
Approved invoice never reaches XeroThe invoice is worth zeroSet the job back to Work Order, add the missing line items, complete it and approve again.
Invoice is missing from your usual Xero fileIt synced to another Xero organisationRe-integrate with the right organisation, move the job back to Work Order then Completed, and approve again.
"You have reached the limit of invoices you can approve"Your Xero account is on a trial or a plan that caps invoices each monthUse Xero's demo company for testing, or move to a Xero plan without the cap. Check Xero's current pricing page.
A change in ServiceM8 doesn't update the Xero invoiceA payment or credit note is already allocated to it in XeroMake further changes to that invoice in Xero.
A new tracking category value isn't in ServiceM8Tracking categories only sync once a dayWait up to 24 hours after adding it in Xero.
A supplier from Xero isn't in ServiceM8Supplier-only contacts aren't importedExpected behaviour. Contacts that are both customer and supplier do come across.

Sources: ServiceM8 help articles on invoice number conflicts, contact archive errors, invoice sync issues, the invoice limit message and Xero tracking categories.

The single habit that prevents most of these: if a job lives in ServiceM8, invoice it from ServiceM8. Invoices raised straight in Xero don't come back, and they're the usual reason for number clashes and doubled-up clients.

Payments, deposits and ServiceM8 Pay fees

Payments are where the sync does the most work. A card or EFTPOS payment taken on site goes to your chosen Xero account, and a bank transfer you reconcile in Xero comes back and marks the job paid in ServiceM8 within 30 minutes. If you need to remove a payment that came from ServiceM8, ServiceM8 says it has to be done in Xero, by finding it in the payments account and using Remove & Redo.

If you take payments through ServiceM8 Pay, payouts can be grouped, so the deposit in your bank doesn't match the individual invoices. ServiceM8's Pay transactions feature handles this with a clearing account in Xero. The customer's payment goes into the clearing account, ServiceM8 creates the fee as a bill paid from that account, and the payout is recorded as a transfer to your bank account. In your bank feed you match the deposit to that transfer, not to the individual invoices. ServiceM8 itself says to talk to your accountant or bookkeeper before switching it on, and I'd agree.

Getting paid is still the bigger issue for most trades. Xero's Small Business Insights for the September 2026 quarter, published 29 October 2026, found Australian small businesses waited an average of 24.3 days to be paid and were paid 6.9 days late. The sync tells you who has paid. It doesn't chase the ones who haven't. Our guide to automated invoice follow-up for tradies covers that part.

What doesn't the ServiceM8 Xero integration do?

The built-in sync covers the sales side well. These are the gaps I see raised most, based on what ServiceM8's documentation does and doesn't list:

  • Supplier bills and purchase orders. They aren't part of the documented Xero sync. ServiceM8 has a Supplier Invoice Import add-on that attaches supplier invoices to jobs, so check its help page for whether anything goes to Xero before you rely on it. Otherwise someone is keying supplier bills into Xero and trying to match them to jobs.
  • Tax changes made in ServiceM8. They stay in ServiceM8. Set tax rates up in Xero and let them flow down.
  • Invoices raised in Xero. They never appear in ServiceM8, so the job looks unbilled.
  • Line-by-line tracking. Tracking categories are chosen on the job, so the whole invoice carries the same values. If you need to split one invoice across two divisions, that's extra work in Xero.
  • Job profit reporting. Xero holds the money and ServiceM8 holds the job detail. A report that puts quoted hours, actual hours, materials and supplier costs for each job side by side has to be built.
  • Other systems. If you also run a CRM or a separate quoting tool, it isn't part of this link. Joining them is CRM integration work.

For a small team that quotes, invoices and gets paid through ServiceM8, it does what it says. The gaps only start to cost you when an office person spends a chunk of each week filling them by hand.

If you're not sure which of these gaps is costing your team the most, the free AI readiness check takes about 3 minutes and shows where automation would save the most admin time in a trade business.

Worked example: a plumbing business with gaps around the sync

Say a 10-person plumbing business in Cairns runs ServiceM8 for jobs and Xero for the books. It has two divisions, maintenance and new homes, set up as a Xero tracking category. (This is a made-up business.)

The sync handles invoices and payments fine. Three things still eat the office manager's week:

  1. Supplier invoices arrive by email from three wholesalers. She types each one into Xero as a bill, looks up the job number and picks the division.
  2. Every so often the bookkeeper raises a quick invoice straight in Xero for a warranty callout. Next week ServiceM8 sends job 5120 as 5120A, and nobody is sure which invoice is the real one.
  3. The owner wants to know which new-homes jobs went over the quoted hours. That means exporting from both systems and lining them up in a spreadsheet.

Here's how I'd handle it. First, the free fixes: switch the Xero invoice number setting to suit how they work, and agree that every job is invoiced from ServiceM8, including warranty callouts. That stops the number clashes without any new software.

Then an automation on top, built in n8n or Make. When a supplier invoice email arrives, it reads the PDF, finds the job number, and creates a draft bill in Xero with the job number in the reference and the right tracking category. Xero's accounting API supports bills as well as sales invoices, and ServiceM8 has an API with event webhooks for things like completed jobs and paid invoices. The office manager checks and approves each draft bill. Anything without a job number goes to her to sort out.

A weekly report then pulls job hours from ServiceM8 and bills from Xero into one sheet, flagging jobs that ran over quote. A second check lists any job approved in ServiceM8 with no matching Xero invoice, so a failed sync gets caught well before month end.

The native sync keeps doing its job. The automation fills the gaps around it, and the office manager still approves every bill.

What stays with a person

Some jobs should stay with someone in the office, however well the systems are joined:

  • Approving invoices before they go to Xero, especially variations and jobs that ran over.
  • Reconciling the bank feed and deciding what a payment that doesn't match should be.
  • Credit notes, disputed jobs and write-offs.
  • Tax codes and account codes, set up with your bookkeeper or accountant.
  • The phone call to a customer who's upset about a bill.

Automation is good at moving data and flagging what doesn't match. Judgement calls about money and customers belong with your team.

When is it worth adding an automation on top?

If you send a modest number of invoices, approve them as jobs finish and take most payments on site, the built-in sync is enough. Set it up carefully and leave it alone. Our guide on how to automate invoicing covers the basics if you're starting from scratch.

It's worth looking at an automation when one of these is true:

  • Someone re-types supplier bills or purchase orders into Xero every week.
  • You need job costing or division reports that combine ServiceM8 and Xero data.
  • Sync errors pile up in Awaiting Approval and nobody notices until month end.
  • ServiceM8 and Xero need to talk to a third system, like a CRM, a supplier portal or a builder's portal.

That's the kind of thing our workflow automation service builds. It's built in your own accounts, so you own it, and every step that touches money can wait for a person to approve it. For more ideas on where trade businesses use AI and automation for admin, see AI automation for tradies.

If you'd like a second opinion on your ServiceM8 and Xero setup, book a free call. I'll tell you which gaps are worth fixing and which ones the built-in sync already covers.

Sources

Facts checked 19 November 2026. This isn't accounting, tax or payroll advice. Check your Xero settings with your bookkeeper or accountant, and see the ATO's GST pages for tax questions.

Want your ServiceM8 and Xero setup checked? Tell us what your office still does by hand. We'll show you what the built-in sync already covers and what's worth automating on top. Book a free call.